Home  /  Courses & Qualifications  /  Masonry

Masonry

Construction sectorCode 238 / 138NSC-INSC-II

Brick and block work, mortar preparation, soling and plastering for building construction.

Course overview

About the Masonry qualification

Masonry is one of the most in-demand construction trades in Bangladesh and overseas. This competency-based programme trains you to set out and build brick and block walls, prepare mortar to the correct mix, lay brick soling and finish surfaces with plaster, working safely as part of a site team.

What you will learn

Quick facts

  • SectorConstruction (12)
  • BTEB occupation code238 / 138
  • Levels offeredNSC-I & NSC-II
  • Nominal duration360 hours per level
  • Practical trainingApprox. 70–80% in workshop
  • DeliveryFace-to-face, Ashulia campus
  • AssessmentCompetency-based, by BTEB-registered assessor
  • CertificateNational Skill Certificate (BTEB)

Units of competency

What you are trained and assessed on

Units are listed exactly as published in the BTEB competency standard for this occupation. Core units are occupation-specific; sector and generic units build workplace skills.

National Skill Certificate-I (Masonry, code 238)

  • CONMAS1001A1Perform Fundamental Works of MasonryCore
  • CONMAS1002A1Use Tools for Masonry WorksCore
  • CONMAS1003A2Prepare Masonry MortarCore
  • CONMAS1004A1Perform Brick SolingCore
  • CONMAS1005A1Construct Basic Brick WallCore
  • CONSS1001A2Work in the Construction SectorSector
  • GN1001A1Use Basic Mathematical ConceptsGeneric
  • GN1012A1Work in a Team EnvironmentGeneric
  • GN1014A1Practice Occupational Safety and Health (OSH) ProceduresGeneric

Practical hours

360 nominal hours per level, of which approx. 70–80% is hands-on workshop practice.

Entry requirements

Minimum Class VIII (JSC or equivalent) pass, or able to read, write and do basic calculations. Age 15+.

National Skill Certificate-II (Masonry, code 238)

  • CONMAS2006A1Construct Basic Block WallCore
  • CONMAS2007A1Construct Advance Brick WorksCore
  • CONMAS2008A2Perform Plaster Works on Masonry SurfaceCore
  • CONSS2002A2Interpret Construction Sector Related DrawingsSector
  • GN1011A1Communicate in the WorkplaceGeneric
  • GN1013A1Practice Workplace CleanlinessGeneric

Practical hours

360 nominal hours per level, of which approx. 70–80% is hands-on workshop practice.

Entry requirements

NSC-I in the same occupation, or equivalent workplace experience assessed through Recognition of Prior Learning (RPL).

National Skill Certificate-I (Masonry, code 138)

  • CON0100112AWork in the Construction SectorSector
  • CON0100212AInterpret Drawings and Specifications in Masonry ManualsSector
  • CON0100312AUse Hand Tools and Power Tools for MasonrySector
  • CONMAS0100112APrepare Masonry MortarCore
  • CONMAS0100212APerform Paving WorkCore
  • CONMAS0100312APerform Basic Masonry WorksCore
  • CONMAS0100412APerform Plaster on Masonry SurfaceCore
  • GN0100112ACommunicate in the WorkplaceGeneric
  • GN0100212AWork in a Team EnvironmentGeneric
  • GN0100312APractice Workplace CleanlinessGeneric
  • GN0100412APractice Occupational Health and Safety (OHS) ProceduresGeneric

Practical hours

360 nominal hours per level, of which approx. 70–80% is hands-on workshop practice.

Entry requirements

Minimum Class VIII (JSC or equivalent) pass, or able to read, write and do basic calculations. Age 15+.

Assessment method

How competence is assessed

Assessment is competency-based: you are judged against every performance criterion in the unit, using several types of evidence.

Practical demonstration

You perform real tasks in the workshop while the assessor observes against a checklist.

Oral questioning

Questions confirm you understand the why behind the task, including safety.

Written test

Short written questions check underpinning knowledge for each unit.

Portfolio of evidence

Work samples, logbook and training records support the assessment decision.

Each unit is judged Competent or Not Yet Competent. When you are competent in all units of a level, BTEB issues a National Skill Certificate. If you complete only some units, you receive a Statement of Attainment (SOA) for those units. You may appeal any assessment decision under our Assessment Quality Policy.

Career outcomes

Where this qualification can take you

Work health & safety

PPE you will use

Enrol in Masonry

Ask about the next intake, fees and entry requirements. Experienced workers can apply for Recognition of Prior Learning.